"Slotted" Quotes from Famous Books
 ... of this is cut out of flat sheet brass (Fig. 63), and to one side is soldered a cap made by turning down the edges of a cross with very short arms. The little lugs aa are soldered to this, and slotted with a jeweller's file to engage with notches cut in the valve rod (see Figs. 58 ...
— Things To Make • Archibald Williams
... plane, XY. This journal turns freely in the outer end of a lever, M, which transmits the reciprocating motion to the valve, through the rock-shaft, O, and another lever, N. Connected with the lever, M, by the bridge-piece, K, and facing it, is a slotted arm, G, as shown in the end view, Fig. 10. The center line of this slot lies in the plane which contains the axes of the journal, J, and ...
— Scientific American Supplement, No. 415, December 15, 1883 • Various
... Craig Hunter, director of a medical supply firm, reported a huge elliptical saucer flying at a low altitude in Pennsylvania. He described it as metallic, with a slotted outer rim and a rotating ring just inside. {p. 13} On top of this sighting, thousands of people at Farmington, New Mexico, watched a large formation of disks pass ...
— The Flying Saucers are Real • Donald Keyhoe
... his eccentric rod terminate in a pin which works into a straight slotted lever, furnished with jaws similar to the jaws on the eccentric rods of locomotives. By raising the pin of the eccentric rod in this slot, the travel of the valve will be varied, and expansive action will be ...
— A Catechism of the Steam Engine • John Bourne |
