"Angle iron" Quotes from Famous Books
 ... surface of the mooring link that comes in contact with the shackle and mooring chain is steeled. The gas holder rests upon a plate bent up on each side, and riveted to the keelson, and is prevented from rolling by four gusset plates, with two short pieces of angle iron riveted thereto at the ends and coming in contact with the holder, and at the ends by angular plates, and angle iron riveted on each side and riveted to the keelson. The superstructure consists of four legs of ...
— Scientific American Supplement, No. 455, September 20, 1884 • Various
... one length of 3/4 by 1/8-in. angle iron for the frame, F, Fig. 1. This can be obtained at any steel shop and should cost about 20 cents. All the horizontal pieces, B, should be beveled 45 degrees at the ends and drilled for 3/16 in. stove bolts. The beveling may be done by roughing out with a hacksaw and finishing ...
— The Boy Mechanic: Volume 1 - 700 Things For Boys To Do • Popular Mechanics |
